1991 Chrysler 5th Avenue headliner repair guide
This is a 1991 Chrysler 5th Avenue that the headliner had turned loose. The 5th Avenue headliner installation is basically like any other automobile; except the trim is attached differently. There are no exposed screws on the trim around the headliner; because they are attached by metal clips from the backside. The color we used was 2187 charcoal blue. A full size headliner kit will do this car; click this link to go to the order page.
Remove the trim that holds the headliner up. | If there is a front console; it is attached with screws under the light cover lens and at the front; ususally by the sunvisor support hangers. |
The trim around the sides are attached with clips from the backside. (if you can't see screws; this is usually the way trim attaches) | Let the board drop free. |
Remove the board through the front passenger side door. | Remove the cloth. |
Clean the board with a softbristled brush -- (bathroom or tire cleaning brush). Clean any fiberglass board (yellow) with a soft bristled brush. | Replace the cloth with adhesive; starting in the center and working out to the ends (about a quarter at a time). |
Fold the ends over the board and glue them; and trim the excess around the edges and cut the holes where needed. | Replace the board and the trim -- NEW HEADLINER. |
Headliner installation Chrysler Fifth Avenue, install new headliner Chrysler Fifth Avenue